一、設備的主要用途：

Main Purpose of the Equipment:

該臺臥式氫氣爐由爐體、充氣系統、濕氫裝置、水冷系統、真空系統等組成。

This horizontal hydrogen furnace consists of a furnace body, gas charging system, wet hydrogen device, water cooling system, vacuum system, etc.

用于可伐金屬等脫碳退火、釬焊、還原燒結等。

It is used for decarbonization annealing, brazing, reduction sintering, etc., of materials such as Kovar metal.

二、主要技術參數：

Main Technical Parameters:

有效工作（加熱）區：
Effective Working (Heating) Zone:
350mm × 350mm × 1000mm

爐溫：
Furnace Temperature:
最高溫度不低于1600℃；工作溫度不低于1550℃；
Maximum temperature not less than 1600°C; Operating temperature not less than 1550°C;

溫度均勻性：
Temperature Uniformity:
≤ ±10°C (empty load, holding at 1000°C for 30 minutes)

控溫穩定度：
Temperature Control Stability:
±1°C, with PID parameter self-tuning function

控溫方式：
Temperature Control Method:
Automatic program control, capable of storing no less than 20 curves, each curve can be set with no less than 20 segments

極限真空度：
Ultimate Vacuum Degree:
≤ -0.09 MPa (gauge pressure)

安全設施：
Safety Facilities:
Alarms for insufficient water/gas pressure, abnormal heating, and hydrogen explosion-proof device

燒結氣氛：
Sintering Atmosphere:
Nitrogen + Hydrogen, with humidification function

加濕系統：
Humidification System:
Water temperature heating controllable

熱偶類型：
Thermocouple Type:
Control thermocouple: Tungsten-Rhenium type W-Re526; Measurement thermocouple: Type K

抽真空時間：
Vacuum Pumping Time:
≤ 60 min

漏氣率（密封性）：
Leak Rate (Sealing):
≤ 0.5 Pa/h

最大升溫速率：
Maximum Heating Rate:
≥ 20°C/min

氫氣壓力：
Hydrogen Pressure:
0.02 - 0.4 MPa

氮氣壓力：
Nitrogen Pressure:
0.02 - 0.05 MPa

動力條件：
Power Conditions:
3-phase 380V/220V, 50 Hz, 100 kW

普通冷卻水：水溫≤15℃（夏季），水壓0.2-0.4 MPa，進水管口徑1 1/2英寸。
Ordinary cooling water: Water temperature ≤15°C (in summer), water pressure 0.2-0.4 MPa, inlet pipe diameter 1 1/2 inches.